N2 Generator TNG1816
Model: N2 Generator TNG1816 with air compressor
Color: Black blue,ESD
Exterior Dimension(mm): W600*D1000*H851
N2 Output: 13L /min@>99% purity
Compressed air: Temperature ≤20℃;Pressure 6~8bar
Display: High brightness LED
Power Supply: 220V 50Hz
Standby Consumption: ≤10W
Nitrogen generator is specially designed for our nitrogen dry cabinet. The nitrogen generator uses pressure swing adsorption (PSA) principle to extract high purity nitrogen from the air to supply nitrogen cabinet in order to protect the electronic components against humidity and oxidation.
Nitrogen generator requires a source of dry compressed air. The compressed air is passed through a hollow fiber membrane, filtering out oxygen, carbon dioxide and water leaving a high purity nitrogen gas. Prefilter and final multi-stage filters removes the other particles in the gas such as dust and moisture.
How Nitrogen Generator Works?
Nitrogen Generators operate on the Pressure Swing Adsorption (PSA) principle to produce a continuous stream of nitrogen gas from compressed air. Two towers are filled with carbon molecular sieve (CMS). Pretreated compressed air enters the bottom of the on-line tower and follows up through the CMS. Oxygen and other trace gasses are preferentially adsorbed by the CMS, allowing nitrogen to pass through. After a pre-set time, the on-line tower automatically switches to regenerative mode, venting contaminants from the CMS. Carbon molecular sieve differs from ordinary activated carbons in that it has a much narrower range of pore openings. This allows small molecules such as oxygen to penetrate the pores and be separated from nitrogen molecules which are too large to enter the CMS. The larger molecules of nitrogen by-pass the CMS and emerge as the product gas.
Atmospheric air contains essentially 78% nitrogen and 21% oxygen. Ordinary dry compressed air is filtered and passed through a technically advanced bundle of hollow membrane fibers where nitrogen is separated from the feed air by selective permeation. Water vapor and oxygen rapidly permeate safely to the atmosphere, while the nitrogen gas is discharged under pressure into the distribution system. Pressure, flow rate and membrane size/quantity are the main variables that affect nitrogen production. Nitrogen purity (oxygen content) is controlled by throttling the outlet from the membrane bundle(s). At a given pressure and membrane size, increasing the nitrogen flow allows more oxygen to remain in the gas stream, lowering nitrogen purity. Conversely, decreasing nitrogen flow increases purity. For a particular purity, higher air pressure to the membrane gives a higher nitrogen flow rate. Purity ranges of less than 90% to 99.9% are possible. By combining multiple membrane bundles, an infinite number of flow/purity ranges are available to satisfy practically any application that requires nitrogen gas.
- The whole N2 generator adopts 1.2mm galvanized steel with USA Dupont baking varnish,which is strong corrosion resistant,excellent sealing performance.
- Black color is ESD model.
- Nitrogen Generators operate on the Pressure Swing Adsorption (PSA) principle to produce a continuous stream of nitrogen gas from compressed air.
- 98%-99.9% High purity nitrogen gas.
- Tailor made for NetDry nitrogen cabinet for continuous nitrogen supply.
- Mositure and oxidation killer.
- Suit moisture sensitive and O2 sensitive electronic components and other materials
|Relative Humidity||Suggested stored items|
|55%~45%RH||Tapes,CD,lenses,microscope,photograph,oil paintings,stamps,coins,antiques,leather goods,negative,drawings,album,slides,industrial design,etc|
|45%~35%RH||Optical lenses,precision instruments,camera, lenses,measuring tools,capacitors,batteries,EI,light sources,crystal,PCB,detector,charger,microscopes, endoscopes, electronic appliance, magnetic tape,chemical, tea,coffee,seeds,cigarette etc.|
|35%~20%RH||Samples,filters,precision dies,measurement instruments,pollen,all electronic parts, PCB, wafer,metallic powders, semiconductors, medical supplies etc.|
|10%~20%RH||Electronic components,PCB,crystal,chemical,LED and other complicated electronic components,etc.|
|10%-1%RH||IC,BGA,copper,silver,and materials very sensitive to humidity,etc|